Being Led Through the Canal

Under the old lock system at Panama Canal, tugboats’ engagement with ships has been limited to guiding them in open waterways and to the entrance of the locks, where powerful locomotives known as “mules” take over, latching on and keeping the vessels in place as the water level is raised or lowered.

There are no mules in the new locks setup. Instead tugs approach a ship, latch on at both the bow and stern and accompany it inside the 1,400-foot locks. With the lock doors closed on a 1,200-foot New Panamax, there’s little room to operate for the roughly 90-foot tugs positioned both fore and aft.

The shipping vessels run on their own propulsion throughout, and are under the control of a canal pilot who goes on board to steer. Communication between the tugs and the pilot are key.

A tugboat gently guides a large ship through the Aqua Clara Lock, Panama Canal

Being Led

Being Led

Entering the Lock

Entering the Lock

Pulling Away

Pulling Away

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s